Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
      3.2.1. A technical characteristics
       3.2.2. Engine adjustments
      3.2.3. Removal and installation of the fuel pump of a high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and atomizer installation
      3.2.9. Check электрически the operated valve of a stop of the engine
      3.2.10. Pump Bosch adjustment
      3.2.11. Pump Roto Diesel adjustment
      3.2.12. Removal and installation турбокомпрессора
       3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Engine removal
      3.2.15. Engine installation
      3.2.16. Engine dismantling
      3.2.17. Engine assemblage
      3.2.18. The oil pump
       3.2.19. Cooling system
         3.2.19.1. Plums of a cooling liquid
         3.2.19.2. Pouring of a cooling liquid and air removal
         3.2.19.3. Removal and installation of the pump of a cooling liquid
      3.2.20. System of release of the fulfilled gases
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





3.2.19.3. Removal and installation of the pump of a cooling liquid
THE GENERAL DATA

The pump of a cooling liquid can be removed and established in the car after removal of a belt of a drive of system timing.

PERFORMANCE ORDER
1. Unscrew five bolts of fastening of the pump and remove its sealant.
2. The knot a pulley-case-krylchatka is not folding.
3. Before pump installation it is necessary to clear a connection surface. Establish the pump supplied with a new sealant.
4. Tighten bolts the moment of 10 Nanometers.