1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
      3.2.1. A technical characteristics
       3.2.2. Engine adjustments
      3.2.3. Removal and installation of the fuel pump of a high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and atomizer installation
      3.2.9. Check электрически the operated valve of a stop of the engine
      3.2.10. Pump Bosch adjustment
      3.2.11. Pump Roto Diesel adjustment
      3.2.12. Removal and installation турбокомпрессора
       3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Engine removal
      3.2.15. Engine installation
      3.2.16. Engine dismantling
      3.2.17. Engine assemblage
      3.2.18. The oil pump
       3.2.19. Cooling system
      3.2.20. System of release of the fulfilled gases
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment

3.2.15. Engine installation

For engine installation it is necessary to execute actions in return sequence in relation to its removal, and it is necessary to observe following instructions.

1. To replace:
      – self-locking nuts;
      – Holders which are not dismantled;
      – Sealing rings of power shafts (in картере transmissions).
2. To adjust a tension of a belt of a drive сервонасоса the steering amplifier.
3. Establish power shafts.
4. Establish the car on wheels and connect to levers stabilizer connectors.
5. Fill in oil in a transmission and the engine.
6. Remove air from fuel system.
7. Fill system of cooling with a cooling liquid and remove air from cooling system.