Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
      3.2.1. A technical characteristics
       3.2.2. Engine adjustments
      3.2.3. Removal and installation of the fuel pump of a high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and atomizer installation
      3.2.9. Check электрически the operated valve of a stop of the engine
      3.2.10. Pump Bosch adjustment
      3.2.11. Pump Roto Diesel adjustment
      3.2.12. Removal and installation турбокомпрессора
       3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Engine removal
      3.2.15. Engine installation
      3.2.16. Engine dismantling
      3.2.17. Engine assemblage
      3.2.18. The oil pump
       3.2.19. Cooling system
         3.2.19.1. Plums of a cooling liquid
         3.2.19.2. Pouring of a cooling liquid and air removal
         3.2.19.3. Removal and installation of the pump of a cooling liquid
      3.2.20. System of release of the fulfilled gases
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


3.2.19. Cooling system

3.2.19.1. Plums of a cooling liquid
THE GENERAL DATA

Cooling system

1 – a radiator with a broad tank,
2 – the pump of a cooling liquid,
3 – the case of the thermostat,
4 – a cover of the thermostat,
5 – the thermostat,
6 – the engine of the fan,
7 – the fan,
8 – a temperature-sensitive element of the fan,
9 – the gauge of temperature of a cooling liquid,
10 – the temperature gauge of management of a bulb of the alarm system,
11 – a radiator of a heater,
12 – the heat exchanger oil-cooling a liquid

Stopper plum of a cooling liquid in the block of cylinders of the engine

1 – a stopper plum of a cooling liquid
 
Stopper plum of a cooling liquid

The stopper plum of a cooling liquid is specified by an arrow.

Remove the stoppers located in the bottom part of a radiator and on the block of cylinders of the engine (it is necessary to remove a stopper from the broad tank connected to a radiator).