1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
   10.1. A technical characteristics
   10.2. A steering wheel
   10.3. A steering column
   10.4. The ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of a steering with the amplifier
   10.8. The pump of the amplifier of a steering
   10.9. Check of level of oil in system of a steering with the hydraulic booster
   10.10. A tip of steering draught
   10.11. Steering draught
   10.12. Corners of installation of wheels
   10.13. Changes in steering system
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment

10. A steering

Placing of elements of a steering and car suspension brackets

The steering system has реечную steering transfer and a safe steering column. The steering column of management has the universal hinge located in the middle of length which is connected with the intermediate shaft having the second universal hinge in the bottom part. The bottom universal hinge fastens to a gear wheel of steering transfer by a tightening bolt.

Steering transfer is established on a forward bottom frame and connected by two steering draughts to spherical hinges on the external ends with a rotary fist. Steering draught on the end has a carving for adjustment of corners of installation of wheels. Steering draughts are connected by spherical hinges with реечной steering transfer.

The steering with the hydraulic booster (additional equipment) has лопастной the high pressure pump (resulted by a belt from a pulley of a cranked shaft), the rotary dividing valve and the hydraulic servomotor.