Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
   10.1. A technical characteristics
   10.2. A steering wheel
   10.3. A steering column
   10.4. The ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of a steering with the amplifier
   10.8. The pump of the amplifier of a steering
   10.9. Check of level of oil in system of a steering with the hydraulic booster
   10.10. A tip of steering draught
   10.11. Steering draught
   10.12. Corners of installation of wheels
   10.13. Changes in steering system
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


10.13. Changes in steering system
THE GENERAL DATA

Installation реечной steering transfer

1, 2 – washers,

3 – реечная steering transfer,

4 – a cross-beam

Changes are made in cross-beams and in картерах steering transfers that has caused updating of installation of linings between steering transfer and a cross-beam, and also under bolts. It is necessary to observe the installation and value method, presented on drawing and in tables.

System of a steering without the hydraulic booster

Elements
To a body №8026333
From №8026334 to №8030427
From a body №8030428
Carter of transfer
Basic surface отфрезерована
The basic surface is not milled
The basic surface is not milled
Cross-beam (4)
Old type
New type
New type
Thickness of a washer (1)
2 mm
4 mm
2 mm
Thickness of a washer (2)
4 mm
2 mm
2 mm

Elements
To a body №8026333
From a body №8026334
Carter of transfer
Basic surface отфрезерована
The basic surface is not milled
Cross-beam (4)
Old type
New type
Washer (1)
No
No
Thickness of a washer (2)
4 mm
2 mm