Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
   10.1. A technical characteristics
   10.2. A steering wheel
   10.3. A steering column
   10.4. The ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of a steering with the amplifier
   10.8. The pump of the amplifier of a steering
   10.9. Check of level of oil in system of a steering with the hydraulic booster
   10.10. A tip of steering draught
   10.11. Steering draught
   10.12. Corners of installation of wheels
   10.13. Changes in steering system
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





10.2. A steering wheel
THE GENERAL DATA

Shaft and steering wheel

1 – a bottom shaft,
2 – a bottom sealing casing,
3 – an element of fastening of a casing,
4 – the top shaft with a tubular casing,
5 – a steering wheel,
6 – a steering wheel nut

MODELS WITHOUT THE SAFETY PILLOW

Removal

PERFORMANCE ORDER

The prevention

At steering wheel installation on a former place it is necessary to use a new nut and a washer.


1. To establish wheels for movement directly forward.
2. By means of the lever to remove furnish of the central part of a steering wheel.
3. To put combination labels between the end of a shaft of a steering column of management and a steering wheel nave.
4. Using a face key with the extension piece to unscrew a nut of fastening of a steering wheel on some turns.
5. Palms of hands, strongly to strike from a steering wheel underside to remove a steering wheel from shaft grooves.
6. Definitively to unscrew a nut and to remove a steering wheel.

Installation

Installation is made in sequence, return to removal.

MODELS WITH THE SAFETY PILLOW
The prevention

The block of management of a safety pillow is a steering wheel component.

At steering wheel removal it is necessary to fulfil following requirements:

  – Not to throw a steering wheel;
  – Not to assort a steering wheel;
  – Not to establish a steering wheel from other model of the car (even from other models Peugeot 405) as the block of management is calibrated by a safety pillow for each specific model.


Removal

PERFORMANCE ORDER

The prevention

At steering wheel installation on a former place it is necessary to use a new nut and a washer.


1. To remove a safety pillow.
2. To establish wheels for movement directly forward.
3. To put combination labels between the end of a shaft of a steering column of management and a steering wheel nave.
4. Using a face key with the extension piece to unscrew a nut of fastening of a steering wheel on some turns.
5. Palms of hands, strongly to strike from a steering wheel underside to remove a steering wheel from shaft grooves.
6. To disconnect an electric socket from the block of management of a pillow of safety.
7. Definitively to unscrew a nut of fastening of a steering wheel.
8. To remove a steering wheel, taking a plait of wires of a pillow of safety through a steering wheel. Not to disconnect an electric socket of the block of management of a pillow of safety (located in a steering wheel).

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal, taking into account following moments:
      – To combine the labels put before removal;
      – To establish a new washer and to tighten a nut of fastening of a steering wheel the demanded moment;
      – To establish a safety pillow.