Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
   10.1. A technical characteristics
   10.2. A steering wheel
   10.3. A steering column
   10.4. The ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of a steering with the amplifier
   10.8. The pump of the amplifier of a steering
   10.9. Check of level of oil in system of a steering with the hydraulic booster
   10.10. A tip of steering draught
   10.11. Steering draught
   10.12. Corners of installation of wheels
   10.13. Changes in steering system
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





10.1. A technical characteristics
THE GENERAL DATA

Key parametres of steering transfer without the hydraulic booster

The transfer relation
23,8
Number of teeths driving gear wheels
6
Number of turns of a steering wheel from an emphasis against the stop
4,14
Diameter of a turn:
  – Between walls
11,00 m
  – Between sidewalks
10,55 m

Key parametres of steering transfer with the hydraulic booster

The transfer relation
17,9
Number of teeths driving gear wheels
8
Number of turns of a steering wheel from an emphasis against the stop
3,13
Diameter of a turn:
  – Between walls
11,00 m
  – Between sidewalks
10,55 m
Privodnoj belt of the pump
Hutchinson 970 K4
Oil for system of a steering with the hydraulic booster:
  – Quantity
Nearby 0,70 дм3
  – Recommended type
ATF Dexron H, Esso D 21065 or Shell 20137
Service
Each 20 000 km of run it is necessary to check oil level

The tightening moments

Nut of the spherical hinge of a rotary fist
35 Nanometers
Counternut of steering draught
45 Nanometers
Fastening of a shaft of a steering wheel to рейке transfers
15 Nanometers
Nut of fastening of a steering wheel
35 Nanometers
Bolts of fastening of steering transfer:
  – Models to 1992 г
40 Nanometers
  – Models with 1993 г
90 Nanometers
The spherical hinge of steering draught:
Early (continuous) fixing element to a nave
45 Nanometers
Later (hollow) fixing element to a nave
35 Nanometers