Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
   10.1. A technical characteristics
   10.2. A steering wheel
   10.3. A steering column
   10.4. The ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of a steering with the amplifier
   10.8. The pump of the amplifier of a steering
   10.9. Check of level of oil in system of a steering with the hydraulic booster
   10.10. A tip of steering draught
   10.11. Steering draught
   10.12. Corners of installation of wheels
   10.13. Changes in steering system
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


10.9. Check of level of oil in system of a steering with the hydraulic booster
THE GENERAL DATA

The prevention

Oil level depends on temperature.


Check

PERFORMANCE ORDER
1. At the idle engine to establish wheels for movement directly forward.
2. To check up oil level in a tank.
3. To add quantity of oil so that its level was between two labels. Oil level never should be below a sign "mini".

Replacement

PERFORMANCE ORDER
1. To put the car over a hole or on the lift. To disconnect the accumulator.
2. To merge oil from a hydraulic contour, having disconnected from the dividing valve a high pressure hose. To finish plums of oil from a contour, turning some times a steering wheel in both directions against the stop.
3. To check up, whether connections of high and low pressure are well fixed.
4. To fill in 0,3 дм3 oils in a pump tank.
5. At the idle engine slowly to turn a steering wheel in both directions against the stop.
6. To add quantity of oil in a tank to demanded level.
7. To start the engine.
8. To remove air from a contour, turning some times forward wheels in both directions against the stop and adding oil in process of fall of its level in a tank.