1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
   10.1. A technical characteristics
   10.2. A steering wheel
   10.3. A steering column
   10.4. The ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of a steering with the amplifier
   10.8. The pump of the amplifier of a steering
   10.9. Check of level of oil in system of a steering with the hydraulic booster
   10.10. A tip of steering draught
   10.11. Steering draught
   10.12. Corners of installation of wheels
   10.13. Changes in steering system
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment

10.11. Steering draught

The prevention

At installation to the place of the spherical hinge it is necessary to use a new internal spring washer.


1. To remove a tip of steering draught.
2. To remove collars and to shift a protective cover of steering transfer on steering draught.
3. To unscrew internal spherical шарнирное connection of steering draught from gear рейки, keeping gear рейку from проворачивания, fixing a lock washer spherical swivel connections in pair captures.
4. To remove steering draught and a lock washer.
5. To check up a condition of steering draught.


1. To establish a new lock washer on the end gear рейки, and to put on internal threads of a carving spherical swivel connections means interfering unscrewing.
2. To screw up spherical шарнирное connection in gear рейку, holding a lock washer in pair captures.
3. To establish a protective cover of steering transfer.
4. To establish a tip of steering draught.
5. To adjust installation of forward wheels.