Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
      3.2.1. A technical characteristics
       3.2.2. Engine adjustments
      3.2.3. Removal and installation of the fuel pump of a high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and atomizer installation
      3.2.9. Check электрически the operated valve of a stop of the engine
      3.2.10. Pump Bosch adjustment
      3.2.11. Pump Roto Diesel adjustment
      3.2.12. Removal and installation турбокомпрессора
       3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Engine removal
      3.2.15. Engine installation
      3.2.16. Engine dismantling
      3.2.17. Engine assemblage
      3.2.18. The oil pump
       3.2.19. Cooling system
      3.2.20. System of release of the fulfilled gases
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


3.2. Diesel engines
THE GENERAL DATA

Cut of engine XUD 9

Engines are four-cycle, four-cylinder, рядными. Engine fastening – cross-section ahead of the car with an inclination back on 30 °.

Placed in a head of the block of cylinders the camshaft is set in motion by a gear belt. These engines have water cooling.

Engine XUD key parametres 7TE:
  – Diameter of the cylinder
80 mm
  – A piston stroke
88 mm
  – Working volume
1769 sm3
  – Compression degree
22
  – Pressure of compression
2,5 – 3,0 МПа
  – Pressure minimum
1,8 МПа
  – The maximum number of turns without loading
4800 rpm
  – The maximum capacity
66/90 kw / of h.p. at 4300 rpm
  – The maximum moment
180/18,3 Nanometers at 2000 rpm
Key parametres of engine XUD 9:
  – Diameter of the cylinder
83 mm
  – A piston stroke
88 mm
  – Working volume
1905 sm3
  – Compression degree
23
  – Pressure of compression
2,5 – 3,0 МПа
  – Pressure minimum
1,8 МПа
  – The maximum number of turns without loading
5150 rpm
  – The maximum capacity
51/70 kw / of h.p. at 4600 rpm
  – The maximum moment
120/12,2 Nanometers at 2000 rpm

Engine XUD key parametres 9TE/L:

  – Working volume of the engine
1905 sm3
  – Diameter of the cylinder
83 mm
  – A piston stroke
88 mm
  – Working volume
1905 sm3
  – Compression degree
21,8
  – The maximum capacity:
     • according to ЕСЕ
67,5 kw at 4000 rpm
     • according to DIN
92 h.p. at 4000 rpm
  – The maximum twisting moment:
     • according to ЕСЕ
196 Nanometers at 2250 rpm
     • according to DIN
20 кгм at 2250 rpm