1 – a lattice of a radiator,
2 – a clip,
3 – a forward wing,
4 – противогрязевой a casing,
5 – a forward casing
The prevention
At this operation there is a danger of deformation of a wing. Forward wings are screwed and pasted. For removal of wings without their damage it is necessary to warm up connections between wheel niches and wings by means of the adaptation of giving of hot air (or by means of other source of heat).
Removal
PERFORMANCE ORDER
1. To open a cowl.
2. To remove optical knot of the index of turn.
3. To remove противогрязевой a casing.
4. To unscrew screws of the top fastening of a wing.
5. To unscrew the bolts of fastening placed on support of a body at height of loops of doors.
6. To remove a wing.
7. In case of difficulty to insert the knife end into the warmed-up sticky weight and to stretch it.
Installation
PERFORMANCE ORDER
1. To clear connection surfaces.
2. To impose glutinous consolidation.
3. To establish a wing, without screwing up against the stop elements of its fastening.
4. To close a cowl and to adjust backlashes between it and a wing.