Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.14. Doors
THE GENERAL DATA

Doors

1, 2 – forward doors,
3, 4 – back doors,
5 – a loop,
6, 7 – regulating plates

The prevention

These are exact and labour-consuming operations and they should be carried out together.


Removal

Door hinges are welded on a rack and fasten bolts to a door.

PERFORMANCE ORDER
1. To remove by means of the lever plastic heads with шарнирных fingers.
2. Using a punch with a thin sting, to beat out a cylindrical pin from the terminator of opening of a door.
3. If at doors there are any electric elements, to remove an upholstery of a door and a protective film.
4. To disconnect sockets from electric elements and скоб fastenings.
5. To remove a rubber condensing ring from a door first line.
6. To take from a door electroconducting.
7. Supporting a door, to unscrew шарнирные fingers (arrow) from hinges and to remove a door. At performance of this operation glass should be lowered, and the second person should hold doors.
8. To remove doors, paying attention not to damage a surface.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal, thus шарнирные fingers should be established so that their heads have been directed to each other.
2. By means of regulating plates to adjust backlashes прилегания doors.

Adjustment of position of a door (early models)

PERFORMANCE ORDER
Door position can be adjusted the linings established between the hinge and a door. For addition or removal of linings it is necessary to weaken bolts, крепящие the hinge to a door.