Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
13.1. Care of a body
13.2. Care of an upholstery and rugs
13.3. Repair of insignificant damages of a body
13.4. Repair of strong damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. Replacement of a headlight and the index of turns
13.8. Replacement of a back lantern
13.9. Replacement of a forward wing
13.10. A cowl
13.11. A cable of the lock of a cowl
13.12. The cowl lock
13.13. Replacement of the forward panel
13.14. Doors
13.15. A door upholstery
13.16. The lock and handles of opening of a door
13.17. Glasses of doors
13.18. A luggage carrier cover (models the Sedan)
13.19. The lock of a cover of a luggage carrier (model the Sedan)
13.20. A back door (model of Kombi)
13.21. The lock of a back door (model of Kombi)
13.22. The central blocking
13.23. Electric window raiser
13.24. External rear-view mirrors
13.25. Front and back has flown down
13.26. The hatch
13.27. Demountable elements of a body
13.28. Seats
13.29. Seat belts
13.30. Salon furnish
13.31. A ceiling upholstery
13.32. The central console
13.33. The panel of devices
14. An electric equipment
|
THE MECHANISM OF THE TENSION OF THE SEAT BELT OF THE FORWARD SEAT
The system is intended for instant убирания any sagging in a seat belt in case of a head-on collision therefore life threat to forward passengers decreases. Each forward seat can be equipped by system with the mechanism of a tension of the belt, attached directly to the seat belt lock. The mechanism of a tension of a belt copes the block of management of a pillow of safety. When the system of a tension of a belt works, fuel in the cylinder of the mechanism of a tension that the piston of the mechanism of a tension therefore seat belt sagging leaves forces to move forward lights up. After operation of the mechanism of a tension it is subject to replacement.
The prevention That the mechanism of a tension has not worked at carrying out of repair work on the car, it is necessary to disconnect the accumulator and to disconnect an electric socket from a control panel a belt and a safety pillow.
Before performance of any actions on a seat belt to disconnect the negative plug from the accumulator and to wait, at least, for 2 minutes. Further to remove the central panel and to disconnect a socket from the block of management of a tension of a seat belt.
Not to subject the mechanism of a tension to heating above 100 ° With.
SEAT BELT OF THE FORWARD SEAT
Removal
| PERFORMANCE ORDER |
| 1. To remove a covering, then to unscrew the bottom bolt of fastening of a seat belt. |
| 2. To remove furnish of the central rack from outside a ceiling for access to screws of fastening of furnish of the top part of the central rack. |
|
3. To unscrew screws of fastening of furnish of the top part of the central rack. |
|
4. To remove a plate of furnish and to unscrew the top bolt of fastening of a seat belt. |
|
5. To unscrew the fastening screw in the bottom part of the top plate of furnish of the central rack and to remove a furnish plate. |
| 6. To unscrew two screws of fastening of the top part of the bottom plate of furnish of the central rack. |
|
7. To remove threshold furnish, to unscrew screws of fastening of the bottom plate of furnish of the central rack and to remove a furnish plate. |
|
8. To unscrew a bolt (it is specified by an arrow) fastenings of an inertial drum and to remove seat belt assemblage. |
|
Installation
Installation is made in sequence, return to removal.
THE LOCK OF THE SEAT BELT OF THE BELT OF THE FORWARD SEAT
The seat belt lock is attached by a bolt to a frame of a forward seat.
Removal
| PERFORMANCE ORDER |
| If necessary to remove furnish sideways seats for access to a bolt. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in sequence, return to removal. |
| 2. To tighten a bolt of fastening of the lock of a seat belt very reliably. |
|
BACK LATERAL SEAT BELTS (MODELS THE SEDAN)
Removal
| PERFORMANCE ORDER |
| 1. To remove a pillow of a back seat. |
| 2. To unscrew a bolt of the bottom fastening of a seat belt. |
|
3. To remove the top furnish of a back rack. |
| 4. To remove the furnish of the back panel located before back glass. |
|
5. To unscrew a bolt and to remove an inertial drum. |
| 6. To stretch a belt through a groove in furnish of a back shelf, then to take assemblage of a seat belt from the car. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in sequence, return to removal. |
| 2. To tighten a bolt of fastening of the lock of a seat belt very reliably. |
|
BACK LATERAL SEAT BELTS (MODEL КОМБИ)
Removal
| PERFORMANCE ORDER |
| 1. To unscrew a bolt of the bottom fastening of a seat belt. |
| 2. To spread out a back seat. |
|
3. Working in a luggage space, to unscrew two screws () in a forward part of a lateral decorative overlay and a clamp () seat backs. |
|
4. To remove lateral furnish of a luggage carrier for access to a bolt () fastenings of an inertial drum (). |
| 5. To unscrew a bolt of fastening of an inertial drum and to remove drum assemblage. |
| 6. To stretch a belt through a groove in furnish of a back shelf, then to take assemblage of a seat belt from the car. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in sequence, return to removal. |
| 2. To tighten a bolt of fastening of the lock of a seat belt very reliably. |
|
|
|