Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.24. External rear-view mirrors
THE GENERAL DATA

The set of various types of rear-view mirrors can be established depending on model and date of manufacturing of the car.

MIRROR

Removal

PERFORMANCE ORDER
1. On models with mirrors with electroheating to remove an upholstery of a door and to separate a plastic foil from a door for access to electric sockets.
2. To disconnect sockets.
3. By means of the lever to remove a plate of furnish of a mirror from an internal forward corner of a door.
4. To weaken the screw and to remove the button of a regulator from a furnish plate.
5. To remove consolidation.
6. To remove condensing ring.
7. To unscrew four screws (are specified by arrows) mirror fastenings.
8. To remove outside a mirror.

Installation

Installation is made in sequence, return to removal.

MIRROR GLASS

Various methods of fastening of glass of a mirror are used many.

On some mirrors glass is not subject to replacement and it is necessary to make mirror replacement in gathering.

On early models glass can be fixed with use of sticky plates, on later types of a mirror glass can be supported bracket fastenings of electroconducting or a blocking ring.

Removal

PERFORMANCE ORDER
1. For removal of glass of the mirror fixed by a ring of blocking to incline glass completely upwards, then to insert a screw-driver of the bottom part of glass and to disconnect a blocking ring.
2. For removal of glass of the mirror fixed bracket (in drawing at the left) electroconductings, from a glass bottom edge to unclench bracket fastenings.
3. To remove glass of a mirror and to disconnect electroconducting.

THE MECHANISM OF ADJUSTMENT OF GLASS

The mechanism of adjustment of position of a mirror compound with mirror assemblage. If it is faulty, it is necessary to replace a mirror in gathering.