Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
13.1. Care of a body
13.2. Care of an upholstery and rugs
13.3. Repair of insignificant damages of a body
13.4. Repair of strong damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. Replacement of a headlight and the index of turns
13.8. Replacement of a back lantern
13.9. Replacement of a forward wing
13.10. A cowl
13.11. A cable of the lock of a cowl
13.12. The cowl lock
13.13. Replacement of the forward panel
13.14. Doors
13.15. A door upholstery
13.16. The lock and handles of opening of a door
13.17. Glasses of doors
13.18. A luggage carrier cover (models the Sedan)
13.19. The lock of a cover of a luggage carrier (model the Sedan)
13.20. A back door (model of Kombi)
13.21. The lock of a back door (model of Kombi)
13.22. The central blocking
13.23. Electric window raiser
13.24. External rear-view mirrors
13.25. Front and back has flown down
13.26. The hatch
13.27. Demountable elements of a body
13.28. Seats
13.29. Seat belts
13.30. Salon furnish
13.31. A ceiling upholstery
13.32. The central console
13.33. The panel of devices
14. An electric equipment
|
Glasses
1, 7 – overlays,
2 – a windscreen,
3, 9 – rubber consolidations,
|
4, 5 – lowered glasses of doors,
6 – back lateral glass,
8 – back glass |
GLASS OF THE FORWARD DOOR
Use of the tool for clearing of glass from brackets on models till 1992
|
1 – plastic ledges brackets,
2 – plastic bracket,
3 – glass of a window,
4 – the tool |
Removal
PERFORMANCE ORDER |
1. To remove a door upholstery. |
2. To lower glass on 2/3 heights. |
3. To unstick a plastic foil on a door skeleton. |
4. To take bottom уплотнители glasses. |
5. Partially to take уплотнители glasses from a back and top framework of a window. |
6. At presence to disconnect an electric socket from the engine стеклоподъемника and to move a plait of wires aside. |
7. With a sticky tape temporarily to paste over glass on an outer side so that during process of extraction it has not fallen in a door. |
8. To release bracket, крепящую window glass on the mechanism стеклоподъемника. |
9. On models till 1992 for clearing brackets glass fastenings it is necessary to use special tool Peugeot (-) 7.1309. The tool can be made drilling of an aperture of suitable diameter in a small plate. |
10. To pull the tool over a back part brackets, to compress ledges, and at the same time to push glass of a window in a door skeleton, to release it from brackets (Use of the tool for clearing of glass from brackets fig. see models till 1992). |
11. On models since 1993 bracket glasses are established behind. Скоба can be released its turn on a turn quarter. |
12. To unstick a tape, holding glass with a hand. |
13. To take glass, having pulled it upwards and outside of a door. |
|
Installation
PERFORMANCE ORDER |
1. Installation is made in sequence, return to removal, considering following moments. |
2. On models till 1992 check up that bracket, крепящая glass to стеклоподъемнику, has been reliably fixed. |
3. For simplification of installation to the place of sealants to moisten with their soap water. |
4. If the consolidation plastic foil has been damaged at removal, to establish a new film. |
5. To establish a door upholstery. |
|
СТЕКЛОПОДЪЕМНИК THE FORWARD DOOR
Kind of a skeleton of a door and elements of fastening of the mechanism of a raising and glass lowering (at the removed upholstery of a door)
|
Arrows specify elements of fastening of the mechanism of a raising and glass lowering. |
The mechanism of a raising and glass lowering
|
1 – электрически the operated mechanism,
2 – the mechanism operated manually,
3 – the handle for lowering and a raising has flown down manually |
Removal
PERFORMANCE ORDER |
1. To remove glass of a forward door. |
2. To disconnect an electric socket from the engine стеклоподъемника. |
|
3. To unscrew three nuts (are specified by arrows), крепящие the mechanism стеклоподъемника to a door. |
4. To unscrew two nuts, крепящие directing windows to a door. |
|
5. To incline стеклоподъемник and to take it through the bottom window of an internal part of a door. |
|
Installation
Installation is made in sequence, return to removal.
LOWERED GLASS OF THE WINDOW OF THE BACK DOOR
Fastening of a back back door directing lowered glass
|
1 – the top bolt of fastening directing,
2 – the bottom bolt of fastening directing,
3 – directing,
4 – consolidation |
Removal and installation
PERFORMANCE ORDER |
1. To execute the actions similar to actions on removal of glass of a forward door (see above) (taking into account following moments). |
2. Completely to lower window glass. |
3. Before glass removal to remove back directing glasses which is screwed by two screws (see fig. Fastening of a back back door directing lowered glass). |
|
BACK MOTIONLESS GLASS OF THE BACK DOOR
Removal
PERFORMANCE ORDER |
1. To remove a door upholstery. |
2. To remove a protective film from an internal part of a door. |
3. To unscrew two screws, крепящие back directing glasses. |
4. To remove the bottom internal and external consolidation of lowered glass of a back door. |
5. To remove the top and back consolidation of glass of a back door. |
6. To lower back directing glasses at a door. |
|
7. To move forward and to remove back motionless glass with consolidation from a door (And – directing glasses, B – consolidation). |
|
Installation
PERFORMANCE ORDER |
1. Installation is made in sequence, return to removal (taking into account following moments). |
2. For simplification of installation to the place of sealants to moisten with their soap water. |
3. If the consolidation plastic foil has been damaged at removal, to establish a new film. |
4. To establish a door upholstery. |
|
СТЕКЛОПОДЪЕМНИК THE BACK DOOR
To execute the actions similar to actions on removal стеклоподъемника of a forward door (see above). |
|