Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment





13.21. The lock of a back door (model of Kombi)

THE CYLINDER OF THE LOCK OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To open a back door.
2. To unscrew screws of fastening and to remove plastic furnish from an internal part of a back door.
3. Working round edge of carpet furnish, to release brackets fastenings and to remove carpet furnish.
4. To drill rivets (are specified by arrows) fastenings of the cylinder of the lock to a back door.
5. To disconnect draught and to remove assemblage of the cylinder of the lock from a back door.

Installation

Installation is made in sequence, return to removal. Thus it is necessary to use new rivets of fastening of the cylinder of the lock.

THE LOCK OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To open a back door.
2. To unscrew screws of fastening and to remove plastic furnish from an internal part of a back door.
3. Working round edge of carpet furnish, to release brackets fastenings and to remove carpet furnish.
4. To unscrew two bolts (are specified by arrows), крепящие the lock to an arm.
5. To disconnect draught and to remove the lock from a back door.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Before installation of furnish of a back door to check up action of the lock and if it is necessary, to adjust, moving the lock within the extended apertures under fastening bolts.