Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.11. A cable of the lock of a cowl
THE GENERAL DATA

The cable of the lock of a cowl consists of two parts: the body connects the lever of opening of a cowl to the connecting lath, the second part connects locks.

CABLE OF OPENING OF THE COWL

Removal and installation

PERFORMANCE ORDER
1. To unscrew two bolts, крепящие the lever of opening of a cowl to a suspension bracket under the panel.
2. In a motor compartment to take the connecting lath of a cable located behind the forward panel over a radiator.
3. At presence to remove an element of an antitinkling sound and to disconnect a cable from a connector.
4. To adhere a thin strong cord to the end of a cable and to release a cable from all fastenings on all its length.
5. To take a cable in car salon. When the cord end will seem from a partition of a motor compartment, to untie it from a cable of opening of a cowl and to leave in the car. The cord will be necessary for using for a tightening to the place of a new cable.
6. At cable installation on a former place to adhere the end of a new cable to a cord in car salon.
7. For a cord to involve a cable of opening of a cowl in a motor compartment.
8. To check up that the condensing ring of a partition was not displaced at cable installation.
9. The further installation is made in sequence, return to removal.

CONNECTING CABLE

Removal and installation

PERFORMANCE ORDER
1. In a motor compartment to take the connecting lath of a cable located behind the forward panel over a radiator.
2. At presence to remove an element of an antitinkling sound and to disconnect a cable from a connector.
3. To disconnect a cable from the lock and a cover of a cable from a suspension bracket on the lock, to release a cable from all fastenings on all its length and to remove a cable, marking its arrangement. For access improvement to the lock it is desirable to remove a radiator lattice.
4. Installation is made in sequence, return to removal.