Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.6. A back bumper

MODELS THE SEDAN

Removal

PERFORMANCE ORDER
1. To lift a back part of the car and to fix on supports.
2. To remove loose leaves of an arch of a back wheel (access to loose leaves of an arch of a back wheel can be improved if to remove back wheels).
3. To unscrew bolts of fastening of a lateral part of a bumper (one bolt on each party).
4. Working under the bumper basis, to unscrew two bottom bolts of fastening of a bumper.
5. Working in a luggage space, to arrange a socket of illumination of licence plate near to the left lantern of a backing and to disconnect a socket.
6. To extend a bumper from the car and to take a plait of wires of illumination of licence plate through condensing ring in the back panel of a body.

Installation

Installation is made in sequence, return to removal.

MODELS КОМБИ

Removal

PERFORMANCE ORDER
1. To lift a back part of the car and to fix on supports.
2. To remove loose leaves of an arch of a back wheel (access to loose leaves of an arch of a back wheel can be improved if to remove back wheels).
3. On models with back boards under the car body, located from two parties of a bumper to lower a back part of system of release of the fulfilled gases for access to the left back board.
4. To remove back boards under a body of the car for access to lateral bolts of fastening of a bumper.
5. To unscrew bolts of lateral fastening of a bumper (one bolt on each party of a bumper).
6. To unscrew two bolts of fastening of a bumper from each party to a body and to take a bumper from the car.

Installation

Installation is made in sequence, return to removal.