Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.13. Replacement of the forward panel
THE GENERAL DATA

The forward panel

 1 – a forward cross-beam with two fans,

2 – a forward cross-beam with one fan,

3 – lateral elements

Removal

PERFORMANCE ORDER
1. To open a cowl.
2. To remove a negative wire from the accumulator.
3. To lift a forward part of the car and to fix on supports.
4. To remove plastic противогрязевые the casings which are in niches for wheels.
5. To remove a forward bumper.
6. To remove forward indexes of turns.
7. To disconnect forward electric sockets of headlights and the radiator fan.
8. These sockets are located in forward corners of a motor compartment on models till 1992 (drawing at the left) or in the right corner of a motor compartment on models since 1993 (drawing on the right).
9. To unscrew a bolt of fastening of the tyre of grounding from a forward corner of a motor compartment.
10. To disconnect adaptations for correction of adjustment of light of headlights.
11. To disconnect hoses of a washer of headlights.
12. In a motor compartment to take the connecting lath of a cable located behind the forward panel over a radiator.
13. At presence to remove an element of an antitinkling sound and to disconnect a cable from a connector.
14. To remove a cable of opening of a cowl from the forward panel.
15. To unscrew bolts (two or three bolts depending on model) fastenings of the basis of the forward panel to the bottom beam.
16. By means of a screw-driver and special nippers to take two top latches holding a radiator. To raise a radiator for its extraction from ledges and to leave it in a motor compartment, without disconnecting from it hoses.
17. To unscrew two top bolts from each party of the forward panel.
18. To release brackets, крепящие the bottom strips of furnish of a headlight to forward wings.
19. To unscrew four elements of the top fastening of a forward top cross-beam.
20. To take a forward cross-beam, having pulled it forward.
21. It is possible to remove together the block of the forward panel and a bumper.

Repair

The forward cross-beam (attached directly to lateral arches of wheels) is an element to which optical knots of headlights, fans and a radiator fasten.

The forward cross-beam is cast from an artificial material and is not under repair by means of classical polyester pitch. However welding by fusion by means of the device submitting hot air, or by means of the big electric soldering iron is possible.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. To check up, whether all electric devices correctly function.