Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.30. Salon furnish

CASINGS OF THE STEERING COLUMN

Removal

PERFORMANCE ORDER
1. To remove a negative wire from the accumulator.
2. On models with a steering column with an adjustable inclination to move the lever of a regulator of a column to the released position.
3. Working under a steering column, to unscrew five screws of fastening.
4. Then to remove the bottom casing of a steering column.
5. To disconnect sockets from a regulator of light exposure of the panel of devices, the switch of remote control of a radio receiver, the switch of the cruise-control and the alarm electronic control device.
6. To remove the top casing from a steering column.

Installation

Installation is made in sequence, return to removal.

WARE BOX (MODELS TILL 1992)

Removal

PERFORMANCE ORDER
1. Under a ware box to take two шарнирных a finger, using a thin screw-driver.
2. To unscrew two screws, крепящие a back part of a cover and to uncover.

Installation

Installation is made in sequence, return to removal.

WARE BOX (MODELS SINCE 1993)

Removal

PERFORMANCE ORDER
1. Under a ware box to take two шарнирных a finger, using a thin screw-driver.
2. To release a latch of a ware box and to take a ware box from the panel.

Installation

Installation is made in sequence, return to removal.

CARPETS

The carpet in car salon consists of one part and is fixed on edge by screws and percussion caps.

Removal and carpet installation are very labour-consuming because it is necessary to remove all adjacent furnish of salon: seats, the central console and seat belts.