Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment


13.20. A back door (model of Kombi)

BACK DOOR

Removal

PERFORMANCE ORDER
1. To open a back door.
2. To unscrew screws of fastening and to remove plastic furnish from an internal part of a back door.
3. Working round edge of carpet furnish, to release brackets fastenings and to remove carpet furnish.
4. To disconnect electric sockets from the switch of illumination of a luggage carrier.
5. Through apertures in a back door to disconnect sockets of the engine of a screen wiper of a back door and the engine of the central blocking.
6. To remove a hose of a washer from an atomizer.
7. To release plaits of wires and a hose of a washer with скоб fastenings in a back door.
8. To remove sealing rings from the top corners of a back door.
9. If the back door is repeatedly established, before extraction of wires and hoses from a door to adhere to them a strong cord and after extraction of wires to leave a cord at doors.
10. To support a back door, then by means of the lever to remove racks of support of a door in open position with spherical шарнирных connections on a back door.
11. To unscrew nuts (are specified by arrows), крепящие hinges to the top part of a back door and to remove a back door from the car.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal, taking into account following moments.
2. If the back door is repeatedly established, after door installation to adhere to wires and hoses a strong cord which remained at doors after extraction of wires, then to tighten wires and hoses at a door.
3. If it is necessary, to adjust rubber pillows for correct closing of a door.
4. Before installation of furnish of a back door to check up and if it is necessary to adjust position of the lock of a back door.

RACKS OF SUPPORT OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To support a back door in open position.
2. By means of the lever to remove racks of support of a door in open position with spherical шарнирных connections on a back door.
3. Similarly to remove racks of support of a door in open position with spherical шарнирных connections on a body.

Installation

Installation is made in sequence, return to removal.