Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. A forward bumper
   13.6. A back bumper
   13.7. Replacement of a headlight and the index of turns
   13.8. Replacement of a back lantern
   13.9. Replacement of a forward wing
   13.10. A cowl
   13.11. A cable of the lock of a cowl
   13.12. The cowl lock
   13.13. Replacement of the forward panel
   13.14. Doors
   13.15. A door upholstery
   13.16. The lock and handles of opening of a door
   13.17. Glasses of doors
   13.18. A luggage carrier cover (models the Sedan)
   13.19. The lock of a cover of a luggage carrier (model the Sedan)
   13.20. A back door (model of Kombi)
   13.21. The lock of a back door (model of Kombi)
   13.22. The central blocking
   13.23. Electric window raiser
   13.24. External rear-view mirrors
   13.25. Front and back has flown down
   13.26. The hatch
   13.27. Demountable elements of a body
   13.28. Seats
   13.29. Seat belts
   13.30. Salon furnish
   13.31. A ceiling upholstery
   13.32. The central console
   13.33. The panel of devices
14. An electric equipment





13.27. Demountable elements of a body

RADIATOR LATTICE

Removal

PERFORMANCE ORDER
1. To open a cowl.
2. To unscrew forward screws of fastening of a lattice of a radiator.
3. To unscrew bolts (are specified by an arrow) fastenings of the top corners of a lattice which are located over the top internal corners of headlights.
4. To release bracket fastenings, then to take a pin securing the squeezing the cowl lever to a latch.
5. To lift a lattice upwards, to disconnect the bottom ledges of a lattice and to remove a lattice of a radiator from the car.

Installation

Installation is made in sequence, return to removal.

LATTICE BEFORE THE WINDSCREEN

Removal

PERFORMANCE ORDER
1. To remove levers of screen wipers.
2. To disconnect a hose of a washer of glass from a T-shaped splitter on the right side of a lattice.
3. To unscrew four screws of fastening of a lattice.
4. To remove bracket, крепящую a lattice left-hand side.
5. To take a back part of a lattice from a sealant and to remove from the car.

Installation

Installation is made in sequence, return to removal.

OVERLAYS AND EMBLEMS

Overlays and emblems are fixed on a body with use of a special sticky tape.

Removal

PERFORMANCE ORDER
1. For removal of overlays and emblems to heat up them for a glue softening, to insert between an overlay and a body a nylon cord and, moving it to the parties, to cut off an overlay.
2. Completely to clear all traces of glue methyl spirit.