1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
   12.1. A technical characteristics
   12.2. Prorolling of hydraulic brake system
   12.3. Replacement of lobbies brake pads
   12.4. Brake pipelines and hoses
   12.5. Replacement back brake pads on disk brakes
   12.6. Replacement back brake pads on drum-type brakes
   12.7. A forward brake disk
   12.8. A back brake disk
   12.9. A back brake drum
   12.10. A support of a forward brake
   12.11. A support of a back wheel
   12.12. The back brake cylinder
   12.13. The main brake cylinder
   12.14. A brake pedal
   12.15. The vacuum amplifier of brakes
   12.16. The unilateral valve of the vacuum amplifier of brakes
   12.17. Adjustment of a manual brake
   12.18. The lever of a manual brake
   12.19. A cable of a manual brake
   12.20. The switch of a control lamp of inclusion of a manual brake
   12.21. The valve of adjustment of pressure in brake system
   12.22. The stoplight switch
   12.23. Antiblocking system (ABS)
   12.24. Replacement of the gauge of a wheel
   12.25. Removal of air from brake system
13. A body
14. An electric equipment

12.8. A back brake disk


Subsection 12.7 see.


1. To remove brake pads.
2. Using a chalk or a paint to note position of a brake disk concerning a nave.
3. To unscrew screws, крепящие a brake disk to a nave and to remove a disk.


1. Installation is made in sequence, return to removal, considering following moments.
2. To check up that working surfaces of a brake disk and a nave pure and are not deformed.
3. To combine earlier made labels, to establish a brake disk and to fix screws, having tightened their demanded moment.
4. If the new brake disk, that is established, using solvent, to clear it of protective greasing.
5. To establish brake pads.
6. To establish a wheel and to lower the car.