Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
    8.1. A mechanical transmission
      8.1.1. A technical characteristics
      8.1.2. Oil replacement in a transmission
      8.1.3. Adjustment of draught of a gear change
      8.1.4. The gear change lever
      8.1.5. Draught of a gear change
      8.1.6. A cable of blocking of inclusion of a reverse gear
      8.1.7. Sealing rings
      8.1.8. The switch of a lantern of a backing
      8.1.9. A speedometer drive
      8.1.10. Removal and transmission installation
      8.1.11. Transmission dismantling
      8.1.12. Differential repair
      8.1.13. Repair of a primary shaft
      8.1.14. Repair of a secondary shaft
      8.1.15. Transmission assemblage
      8.1.16. Definition of a tightness of the conic bearing of a primary shaft
      8.1.17. The strengthened sealing rings
      8.1.18. Distinctive features of a drive 4 х 4
      8.1.19. A distributing box of system of a drive 4 х 4
    8.2. An automatic transmission
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


8.1.6. A cable of blocking of inclusion of a reverse gear Removal

PERFORMANCE ORDER
1. To disconnect a cable from a transmission, unscrewing a plastic nut and releasing плунжер (it is specified by an arrow).
2. Take плунжер blocking of inclusion of a reverse gear.
3. To remove the central console.
4. To disconnect a cable from a control lever a transmission.
5. To take a cable of blocking of inclusion of a reverse gear in a motor compartment.

Installation

Installation is made in sequence of return to removal, thus for simplification of installation it is necessary to remove a casing of support of the lever of a gear change.