Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
    8.1. A mechanical transmission
      8.1.1. A technical characteristics
      8.1.2. Oil replacement in a transmission
      8.1.3. Adjustment of draught of a gear change
      8.1.4. The gear change lever
      8.1.5. Draught of a gear change
      8.1.6. A cable of blocking of inclusion of a reverse gear
      8.1.7. Sealing rings
      8.1.8. The switch of a lantern of a backing
      8.1.9. A speedometer drive
      8.1.10. Removal and transmission installation
      8.1.11. Transmission dismantling
      8.1.12. Differential repair
      8.1.13. Repair of a primary shaft
      8.1.14. Repair of a secondary shaft
      8.1.15. Transmission assemblage
      8.1.16. Definition of a tightness of the conic bearing of a primary shaft
      8.1.17. The strengthened sealing rings
      8.1.18. Distinctive features of a drive 4 х 4
      8.1.19. A distributing box of system of a drive 4 х 4
    8.2. An automatic transmission
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


купить ножи златоуст на прямую

8.1.4. The gear change lever Removal

PERFORMANCE ORDER
1. To remove the central console.
2. On early models of cars to disconnect a cable of blocking of inclusion of a reverse gear from a control lever a transmission.
3. To unscrew and take a bolt of fastening of draught (2) to a plug of the lever of a gear change on the bottom part of a control lever a transmission. The bolt is accessible through apertures (1) sideways a plastic casing of support of a control lever a transmission (3 – the grounding tyre).
4. To remove a casing and a control lever a transmission.
5. For branch of the lever from a casing to remove bracket, to take two half rings of fastening of a spherical head of the lever together with the lever.

Installation

Installation is made in sequence, return to removal, thus to grease with a thin layer of greasing a spherical head of the lever.