Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
    8.1. A mechanical transmission
      8.1.1. A technical characteristics
      8.1.2. Oil replacement in a transmission
      8.1.3. Adjustment of draught of a gear change
      8.1.4. The gear change lever
      8.1.5. Draught of a gear change
      8.1.6. A cable of blocking of inclusion of a reverse gear
      8.1.7. Sealing rings
      8.1.8. The switch of a lantern of a backing
      8.1.9. A speedometer drive
      8.1.10. Removal and transmission installation
      8.1.11. Transmission dismantling
      8.1.12. Differential repair
      8.1.13. Repair of a primary shaft
      8.1.14. Repair of a secondary shaft
      8.1.15. Transmission assemblage
      8.1.16. Definition of a tightness of the conic bearing of a primary shaft
      8.1.17. The strengthened sealing rings
      8.1.18. Distinctive features of a drive 4 х 4
      8.1.19. A distributing box of system of a drive 4 х 4
    8.2. An automatic transmission
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





8.1.17. The strengthened sealing rings
THE GENERAL DATA

Installation of the strengthened sealing ring with corresponding выступанием
1 – выступание: 1,5 mm on the right side, 1 mm on the left side,

2 – картер,

3 – a sealing ring,

4 – a shaft

Since May, 1988 sealing rings of semiaxes in картере a drive are protected by "a connected casing" which prevents a cut of a sealing edge of rings in an installation time приводных semiaxes.

For replacement of sealing rings it is necessary to use the corresponding assembly shafts, allowing to keep adjusting ledges of rings (modified).

Left-hand side

Sealing ring in diameter of 40 mm.

Выступание: 1 mm.

Shaft: 7.0317 Т.

The right party


Sealing ring in diameter of 30 mm.

Выступание: 1,5 mm.

Shaft: 7.0317 U.