Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
      3.3.1. A technical characteristics
      3.3.2. Check and adjustment of a backlash of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Carburettor adjustment
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit from the petrol engine 1,4 дм3
      3.3.9. Features of dismantling of the petrol engine 1,4 дм3
      3.3.10. Engine TU3 dismantling
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assemblage of a head of the block of cylinders
      3.3.13. Definition of the size of loose leaves
      3.3.14. Engine TU3 assemblage
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of a cooling liquid
      3.3.18. Service and repair of a transmission of type МА
      3.3.19. Removal and installation of a transmission of type МА
      3.3.20. Transmission dismantling
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a primary shaft
      3.3.23. Differential dismantling
      3.3.24. Dismantling of knot of plugs with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of a transmission
      3.3.27. Assemblage of the plug of synchronizers
      3.3.28. Assemblage of knot of plugs with their axes
      3.3.29. Differential assemblage
      3.3.30. Assemblage of a primary shaft
      3.3.31. Assemblage of a secondary shaft
      3.3.32. Transmission assemblage
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


3.3.17. Removal of the pump of a cooling liquid
PERFORMANCE ORDER
1. To disconnect a wire of weight from the accumulator.
2. To merge cooling liquid from system.
3. To remove клиновой a generator belt.
4. To unscrew three bolts of fastening of a pulley of a cranked shaft and to remove a pulley.
5. To unscrew bolts of fastening and to remove a three-element casing of a gear belt.
6. To turn a cranked shaft (for a bolt of a pulley of a cranked shaft) before position in which probably to insert an adjusting core in diameter of 6 mm, serving for flywheel fixation (in a back wall of the block of cylinders), and also an adjusting core in diameter of 10 mm for camshaft fixation (in a forward wall of a head of the block of cylinders).
7. To weaken a bolt of a tension roller of a gear belt and to remove a gear belt from a pulley of the pump of a cooling liquid.
8. To unscrew bolts of fastening of the pump of a cooling liquid to the block of cylinders and to take the pump.
9. To remove a sealing lining from the pump.
10. Pump installation is carried out in return sequence.