Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
      3.3.1. A technical characteristics
      3.3.2. Check and adjustment of a backlash of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Carburettor adjustment
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit from the petrol engine 1,4 дм3
      3.3.9. Features of dismantling of the petrol engine 1,4 дм3
      3.3.10. Engine TU3 dismantling
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assemblage of a head of the block of cylinders
      3.3.13. Definition of the size of loose leaves
      3.3.14. Engine TU3 assemblage
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of a cooling liquid
      3.3.18. Service and repair of a transmission of type МА
      3.3.19. Removal and installation of a transmission of type МА
      3.3.20. Transmission dismantling
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a primary shaft
      3.3.23. Differential dismantling
      3.3.24. Dismantling of knot of plugs with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of a transmission
      3.3.27. Assemblage of the plug of synchronizers
      3.3.28. Assemblage of knot of plugs with their axes
      3.3.29. Differential assemblage
      3.3.30. Assemblage of a primary shaft
      3.3.31. Assemblage of a secondary shaft
      3.3.32. Transmission assemblage
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


3.3.16. Dismantling of the oil pump
THE GENERAL DATA

Elements of system of greasing
1 – a cover of the oil pump
With маслоприемником,
2 – перепускной the valve,
3 – the case of the pump,
4 – приводная a chain of the pump,
 5 – an asterisk of the pump,
6 – the oil filter,
7 – the gauge of pressure of oil,
8 – a tube and the index
Oil level

Verification of details is based on check of surfaces of gear wheels and pump cases on wear tracks (deletings), whether smoothly and without a backlash the valve piston moves, whether the spring of necessary rigidity has lost.

In case of detection of wear tracks of a surface of gear wheels or the case it is necessary to replace the pump.

PERFORMANCE ORDER
1. To remove an asterisk.
2. To remove шпонку a pump shaft.
3. To remove маслоприемник the oil pump.
4. To take a spring and the piston перепускного the valve.
5. During pump assemblage it is necessary to execute actions in return sequence in relation to dismantling.
6. Three bolts of fastening of the pump to the block of cylinders to tighten the moment of 8 Nanometers.