Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
      3.3.1. A technical characteristics
      3.3.2. Check and adjustment of a backlash of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Carburettor adjustment
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit from the petrol engine 1,4 дм3
      3.3.9. Features of dismantling of the petrol engine 1,4 дм3
      3.3.10. Engine TU3 dismantling
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assemblage of a head of the block of cylinders
      3.3.13. Definition of the size of loose leaves
      3.3.14. Engine TU3 assemblage
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of a cooling liquid
      3.3.18. Service and repair of a transmission of type МА
      3.3.19. Removal and installation of a transmission of type МА
      3.3.20. Transmission dismantling
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a primary shaft
      3.3.23. Differential dismantling
      3.3.24. Dismantling of knot of plugs with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of a transmission
      3.3.27. Assemblage of the plug of synchronizers
      3.3.28. Assemblage of knot of plugs with their axes
      3.3.29. Differential assemblage
      3.3.30. Assemblage of a primary shaft
      3.3.31. Assemblage of a secondary shaft
      3.3.32. Transmission assemblage
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





3.3.11. Dismantling of a head of the block of cylinders
PERFORMANCE ORDER
1. To unscrew the ignition distributor, to remove the fuel pump and the ignition coil.
2. To remove an arm of the distributor of ignition.
3. To unscrew from a head of the block of cylinders of a spark plug.
4. To remove the thermostat and to unscrew the thermostat case.
5. To remove inlet and final collectors.
6. To remove from a camshaft a pulley.
7. To unscrew a bolt of the plate holding a camshaft, to remove its and sealing ring of a camshaft.
8. To take from a head of the block of cylinders a camshaft.
9. To compress by turns each spring of the valve by means of the corresponding adaptation and to take lock crackers, and then to weaken pressing of the adaptation and to remove other elements of the valve.
10. To take from directing valves маслоотражательные caps, and then to take all valves. In case of occurrence of traces of destruction on the ends of cores of valves it is necessary to eliminate them with the help наждачного a stone.