Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
      3.1.1. A technical characteristics
       3.1.2. Engine repair
          3.1.2.1. The repair which is not demanding removal of the engine
            3.1.2.1.1. Compression check
            3.1.2.1.2. Check and adjustment of a backlash of valves
            3.1.2.1.3. A privodnoj belt of a camshaft
            3.1.2.1.4. Pulleys of a gear belt
            3.1.2.1.5. Replacement of consolidation of a camshaft
            3.1.2.1.6. Replacement of consolidations of a cranked shaft
            3.1.2.1.7. A privodnoj belt of the generator
            3.1.2.1.8. The air filter
            3.1.2.1.9. A cover of a head of the block of cylinders
            3.1.2.1.10. A camshaft
            3.1.2.1.11. Removal and installation of a head of the block of cylinders
            3.1.2.1.12. Dismantling, repair and assemblage of a head of the block of cylinders
          3.1.2.2. Engine removal
         3.1.2.3. Engine installation
         3.1.2.4. Engine dismantling
          3.1.2.5. Engine assemblage
         3.1.2.6. Start of the engine after major repairs
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


3.1.2.1.4. Pulleys of a gear belt
PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. To weaken and remove driving a generator belt.
3. To remove casings driving a camshaft belt.
4. By means of a pulley bolt to turn a cranked shaft so that drive elements timing to establish in the position, allowing to fix their cores.
5. To weaken a tension of a gear belt and, if necessary, to remove the mechanism of a tension of a belt (in drawing the automatic mechanism of a tension for models 1580 of sm3 and 1905 sm3 with 8 valves is represented).
6. To remove blocking cores from pulleys, to remove a gear belt.
7. To unscrew a bolt of fastening of a pulley of a camshaft, keeping a pulley from проворачивания the special tool, and to remove a pulley. To check up on tightness (on presence of smudges) forward consolidation of a camshaft.
8. To unscrew a bolt of fastening of a pulley of a cranked shaft, thus to keep a pulley from проворачивания, having fixed an engine flywheel, and to remove a pulley together with шпонкой. If the engine is established in the car, to fix a cranked shaft from проворачивания it is possible, having included 4th transfer and having pressed a brake pedal. To check up on tightness (on presence of smudges) forward consolidation of a cranked shaft.
9. Installation of pulleys is made in sequence, return to removal then it is necessary to make adjustment of a tension of a gear belt.