Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
      3.1.1. A technical characteristics
       3.1.2. Engine repair
          3.1.2.1. The repair which is not demanding removal of the engine
            3.1.2.1.1. Compression check
            3.1.2.1.2. Check and adjustment of a backlash of valves
            3.1.2.1.3. A privodnoj belt of a camshaft
            3.1.2.1.4. Pulleys of a gear belt
            3.1.2.1.5. Replacement of consolidation of a camshaft
            3.1.2.1.6. Replacement of consolidations of a cranked shaft
            3.1.2.1.7. A privodnoj belt of the generator
            3.1.2.1.8. The air filter
            3.1.2.1.9. A cover of a head of the block of cylinders
            3.1.2.1.10. A camshaft
            3.1.2.1.11. Removal and installation of a head of the block of cylinders
            3.1.2.1.12. Dismantling, repair and assemblage of a head of the block of cylinders
          3.1.2.2. Engine removal
         3.1.2.3. Engine installation
         3.1.2.4. Engine dismantling
          3.1.2.5. Engine assemblage
         3.1.2.6. Start of the engine after major repairs
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





3.1.2. Engine repair

3.1.2.1. The repair which is not demanding removal of the engine
THE GENERAL DATA

On the engine established in the car, following operations can be carried out:

 – Compression check;
 – Removal and installation of a head of the block of cylinders;
 – Removal and installation of a pulley of a cranked shaft;
 – Removal and installation of a casing of a gear belt;
 – Removal and installation of a gear belt and tension adjustment;
 – Removal and installation of the mechanism of a tension of a gear belt;
 – Replacement of consolidations of a camshaft;
 – Removal and camshaft installation (ов);
 – Check and adjustment of backlashes of valves;
 – Removal and installation of a head of the block of cylinders;
 – Replacement of sleeves of cylinders and pistons;
 – Removal and installation of the oil pallet;
 – Removal and installation of the oil pump;
 – Replacement of consolidations of a cranked shaft;
 – Engine and transmission survey;
 – Removal and flywheel installation;
 – Removal and installation of an oil radiator (model 1998 of sm3 with 16 valves).