Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
      3.1.1. A technical characteristics
       3.1.2. Engine repair
          3.1.2.1. The repair which is not demanding removal of the engine
          3.1.2.2. Engine removal
         3.1.2.3. Engine installation
         3.1.2.4. Engine dismantling
          3.1.2.5. Engine assemblage
         3.1.2.6. Start of the engine after major repairs
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





3.1.2.3. Engine installation
THE GENERAL DATA

The prevention

It is recommended to replace regularly sealing rings of differential and self-locking nuts which have been removed.


PERFORMANCE ORDER
1. To establish the engine in a motor compartment.
2. To establish on the left side an elastic support of a suspension bracket of a transmission and to tighten two nuts the moment of 17,5 Nanometers.
3. To tighten the central nut the moment of 35 Nanometers.
4. To establish the right arm of an engine mount and to tighten nuts the moment of 45 Nanometers.
5. In the cars equipped with the hydraulic booster of system of a steering to establish:
      – A lath of a tension of a belt;
      – A pulley of the pump of the hydraulic booster;
      – Pipelines of the pump of the hydraulic booster.
6. To establish and pull a belt.
7. To establish a radiator.
8. To connect elements of the mechanism of a gear change and a cable отблокировки a reverse gear.
9. To establish and adjust a coupling cable.
10. To connect earlier disconnected electric connections.
11. To connect pipelines of system of cooling, the vacuum amplifier of brakes and топливопроводы.
12. To establish an accelerator cable, knot of the air filter, the accumulator (without connecting it) and its arm.
13. To connect a speedometer cable.
14. To establish a reception pipe.
15. To grease edges of a sealing ring and to establish in differential right полуось.
16. To establish intermediate подшипниковый the case and to tighten bolts the moment of 25 Nanometers (at first having greased with their means Loctite Frenetanch).
17. To turn bolts of fastening of the bearing on a half-turn and to tighten nuts the moment of 17,5 Nanometers.
18. To establish an arm of connection of the engine with a body.
19. A nut from outside the engine to tighten the moment of 35 Nanometers, and a nut from outside bodies the moment of 45 Nanometers.
20. To take a plastic casing of the right sealing ring.
21. To establish left полуось in differential.
22. To connect a rotary fist to levers and to tighten nuts the moment of 30 Nanometers.
23. To establish a plastic casing of a transmission.
24. To remove a casing of a sealing ring.
25. To establish wheels. To lower the car on wheels.
26. To establish connectors of the stabilizer and to tighten bolts the moment of 65 Nanometers.
27. To fill in oil in the engine and in a transmission.
28. To fill in cooling liquid and to remove air from cooling system.
29. To fill in oil in a contour of the hydraulic booster of system of a steering and to remove air from a contour (in the cars equipped with the hydraulic booster of system of a steering).