Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment
   14.1. A technical characteristics
   14.2. Detection of not closed chain
   14.3. The generator
   14.4. A starter
   14.5. Replacement of switches
   14.6. Other electric devices
   14.7. Bulbs of external illumination
   14.8. Bulbs of internal illumination
   14.9. External lighting devices
   14.10. Adjustment of light of headlights
   14.11. A combination of devices
   14.12. Elements of a combination of devices
   14.13. Hours
   14.14. Screen wiper levers
   14.15. The screen wiper and draught engine
   14.16. The engine of a screen wiper of a back door
   14.17. Washers
   14.18. A radio receiver
   14.19. Loudspeakers
   14.20. The aerial
   14.21. Anticreeping system
   14.22. A safety pillow
   14.23. Elements of a pillow of safety
   14.24. Heating and ventilation system
    14.25. Electroschemes and diagrammes


14.19. Loudspeakers

THE LOUDSPEAKERS ESTABLISHED AT THE DOORS

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. To remove a loudspeaker lattice, having picked up it from below a thin screw-driver or having unscrewed three screws.
3. To unscrew screws (are specified by arrows) fastenings, to remove a loudspeaker from a door and to disconnect an electric socket.
4. Installation is made in sequence, return to removal.

THE LOUDSPEAKERS ESTABLISHED ON THE PANEL (ON MODELS TILL 1992)

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. To remove a lattice of a loudspeaker from the top part of the panel.
3. To unscrew screws (are specified by arrows) fastenings, to remove a loudspeaker and to disconnect an electric socket.
4. Installation is made in sequence, return to removal.

ГРАОМКОГОВОРИТЕЛИ, ESTABLISHED ON THE PANEL (MODEL SINCE 1993)

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. By means of a thin screw-driver to take a loudspeaker from the panel and to disconnect an electric socket. The loudspeaker and a lattice make a single whole.
3. Installation is made in sequence, return to removal.

THE LOUDSPEAKERS ESTABLISHED ON THE BACK PANEL (MODEL THE SEDAN)

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. Working in a luggage space (from a shelf underside) to disconnect electroconducting from a loudspeaker.
3. To release plastic brackets fastenings and to take a loudspeaker through a shelf in car salon.
4. Installation is made in sequence, return to removal.