Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
       3.4.1. Contactless system of ignition
         3.4.1.1. The ignition coil
         3.4.1.2. The Module-amplifier of system of ignition
         3.4.1.3. Removal and installation of the distributor of ignition
         3.4.1.4. Dismantling and distributor Ducellier assemblage
         3.4.1.5. Dismantling and distributor Bosch assemblage
         3.4.1.6. Installation of a corner of an advancing of ignition
         3.4.1.7. Check of a centrifugal regulator in the car
         3.4.1.8. Check of a vacuum regulator in the car
       3.4.2. Compound system of ignition (ignition / fuel system)
       3.4.3. Direct system of ignition
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment






3.4.1.8. Check of a vacuum regulator in the car
PERFORMANCE ORDER
1. To check up a centrifugal regulator.
2. To a regulator to connect the vacuum pump.
3. To finish the engine to speed of rotation of 2500 rpm and to measure size of a centrifugal advancing in degrees concerning a point "0" on a plate.
4. To establish разряжение in a range of the values resulted in the characteristic and to finish the engine to speed of rotation of 2500 rpm.
5. To measure size of a corner of an advancing of ignition and to take away earlier measured size of a centrifugal advancing that will give size of a vacuum advancing.