Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
       3.4.1. Contactless system of ignition
         3.4.1.1. The ignition coil
         3.4.1.2. The Module-amplifier of system of ignition
         3.4.1.3. Removal and installation of the distributor of ignition
         3.4.1.4. Dismantling and distributor Ducellier assemblage
         3.4.1.5. Dismantling and distributor Bosch assemblage
         3.4.1.6. Installation of a corner of an advancing of ignition
         3.4.1.7. Check of a centrifugal regulator in the car
         3.4.1.8. Check of a vacuum regulator in the car
       3.4.2. Compound system of ignition (ignition / fuel system)
       3.4.3. Direct system of ignition
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





3.4.1.5. Dismantling and distributor Bosch assemblage
THE GENERAL DATA

Distributor Bosch

1 – a cover of the distributor,
2 – a rotor of the distributor,
3 – противопылевой a casing,
4 – the case of the distributor,
6 – the generator of impulses,
7 – a rotor,
8 – a centrifugal regulator,
9 – a vacuum regulator

Dismantling

PERFORMANCE ORDER
1. To remove the distributor.
2. To take out a rotor of the distributor and противопылевой a casing.
3. To take the top bearing (2 bolts).
4. To take the big ring serving by the holder for bolts of the bearing.
5. To take knot "wire-socket".
6. To remove the spring ring placed on a core.
7. To unscrew bolts of fastening of a vacuum regulator and other elements of fastening.
8. To take a vacuum regulator.
9. Through a special aperture to unhook a spring of a centrifugal regulator.
10. To take out a disk.

Assemblage

PERFORMANCE ORDER
1. To execute actions in return sequence in relation to dismantling process.
2. To establish a vacuum regulator on a disk ledge.
3. To establish the distributor.