Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. Petrol engines
3.1.1. A technical characteristics
3.1.2. Engine repair
3.1.2.1. The repair which is not demanding removal of the engine
3.1.2.2. Engine removal
3.1.2.3. Engine installation
3.1.2.4. Engine dismantling
3.1.2.5. Engine assemblage
3.1.2.5.1. Clearing and check of details
3.1.2.5.2. Шатунные and radical loose leaves
3.1.2.5.3. Definition of the size of loose leaves
3.1.2.5.4. Check of a working backlash in bearings of a cranked shaft
3.1.2.5.5. A cranked shaft
3.1.2.5.6. Knot a rod-piston
3.1.2.5.7. Assemblage of knot a rod-finger-piston
3.1.2.6. Start of the engine after major repairs
3.2. Diesel engines
3.3. The petrol engine 1,4 дм3
3.4. Ignition system
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment
|
The stoppers closing technological apertures which are necessary for taking for full clearing of the block of cylinders
|
|
Stoppers are specified by arrows. |
Never it is impossible шабрить for a surface of connection of the details made of easy alloys; it is necessary to use special cleaning means (Magnus Magstrip or Framet Decaploc).
For full clearing of the block of cylinders to take technological stoppers for what to drill in them apertures, to screw in self-cutting screws and for screws to take stoppers. After engine cleaning to establish new stoppers. Irrespective of a used method of clearing of the block of cylinders it is necessary to be convinced that all apertures and channels are completely cleared and dried up.
|
|