1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
    8.1. A mechanical transmission
    8.2. An automatic transmission
      8.2.1. A technical characteristics
      8.2.2. The drive description
      8.2.3. Removal and transmission installation
      8.2.4. Adjustment of management by a gear change
      8.2.5. A cable of a choice of transfers
      8.2.6. The selector lever
      8.2.7. A cable of compulsory inclusion of a hill-climbing gear
      8.2.8. Adjustment of a tape of a brake
      8.2.9. Removal and installation of the operating servomotor
      8.2.10. Replacement of a sealing ring of an axis of the selector
      8.2.11. The transmission heat exchanger
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment

8.2.6. The selector lever

The selector lever


1. To lift a forward part of the car and to fix on supports. To establish the selector lever in position "P".
2. To remove the central console.
3. To disconnect a cable from the lever of the selector and an installation suspension bracket.
4. To unscrew a bolt of fastening of the lever of the selector to a floor and to take the selector lever in gathering from the car.


Installation is made in sequence, return to removal then it is necessary to make adjustment of a cable of the selector.