8.2.10. Replacement of a sealing ring of an axis of the selector

PERFORMANCE ORDER

1. To remove the air filter. 2. To remove the accumulator and its holder. 3. To separate a cable of management of a gear change from the selector lever. 4. To remove the lever of the selector of an automatic transmission. 5. To modify a standard flat lining in the sequence reflected in drawings. 6. To establish the modified lining instead of the lever of the selector and to fix with the help before the unscrewed nut. 7. To drill a sealing ring a drill in diameter of 2,5 mm through small apertures in a lining. It is necessary to weaken a ring and to facilitate its extraction. 8. To unscrew a nut and to screw in two self-cutting the screw in the big apertures of a lining. 9. To establish the special adaptation 3084 Т under the processed lining and to take a sealing ring. 10. To grease a new sealing ring and to establish it by means of the plug of the corresponding diameter. 11. To establish the lever of the selector and to connect it to a cable of management of a gear change. 12. To establish the accumulator and its holder. 13. To establish the air filter.