Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
    11.1. A forward suspension bracket
    11.2. A back suspension bracket
      11.2.1. A technical characteristics
      11.2.2. Shock-absorber replacement
      11.2.3. Replacement torsionов
      11.2.4. The stabilizer
      11.2.5. The suspension bracket lever
      11.2.6. Removal and installation of a back suspension bracket
      11.2.7. Adjustment of height of a suspension bracket of a body
      11.2.8. Naves of back wheels
      11.2.9. Features of a back suspension bracket of cars 4 х 4
      11.2.10. Tank replacement
      11.2.11. Removal and installation of the lever of a suspension bracket
      11.2.12. Removal and installation of the cylinder of a suspension bracket
      11.2.13. Removal of air from a hydraulic contour
      11.2.14. Removal and pump installation
      11.2.15. Removal and nave installation
12. Brake system
13. A body
14. An electric equipment





11.2.14. Removal and pump installation
THE GENERAL DATA

Installation of collars of electric wires on the high pressure pump

1 – the pump,

2 – электрически the operated valve,

3 – electric wires,

4 – collars

PERFORMANCE ORDER
1. To establish the car on the stationary lift.
2. To remove the left facing of a luggage carrier.
3. To disconnect a socket (red) power supplies of the hydraulic pump (wire М326 and 326).
4. To connect free plugs of a socket near to the button of installation of a suspension bracket in the top position.
5. To reduce pressure.
6. To merge fuel from a fuel tank.
7. To remove a bulk mouth of a fuel tank.
8. To disconnect a connector of the proof-reader of height of installation of a suspension bracket.
9. To establish clips on fuel pipelines.
10. To disconnect fuel pipelines.
11. To unscrew a nut of fastening of the pipeline of a high pressure.
12. To disconnect electric wires of a food of the pump.
13. To remove the pump and электрически the operated valve.
14. For installation of the pump of a high pressure it is necessary to establish thermoshrinkable plugs on connections of electric wires, to fix on the pump of an electricity cable and to execute actions in return sequence in relation to removal process. Also it is necessary to remove air from a contour of a suspension bracket and to fill quantity of liquid LHM to necessary level.