Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
    11.1. A forward suspension bracket
    11.2. A back suspension bracket
      11.2.1. A technical characteristics
      11.2.2. Shock-absorber replacement
      11.2.3. Replacement torsionов
      11.2.4. The stabilizer
      11.2.5. The suspension bracket lever
      11.2.6. Removal and installation of a back suspension bracket
      11.2.7. Adjustment of height of a suspension bracket of a body
      11.2.8. Naves of back wheels
      11.2.9. Features of a back suspension bracket of cars 4 х 4
      11.2.10. Tank replacement
      11.2.11. Removal and installation of the lever of a suspension bracket
      11.2.12. Removal and installation of the cylinder of a suspension bracket
      11.2.13. Removal of air from a hydraulic contour
      11.2.14. Removal and pump installation
      11.2.15. Removal and nave installation
12. Brake system
13. A body
14. An electric equipment





11.2.12. Removal and installation of the cylinder of a suspension bracket
THE GENERAL DATA

Installation of the cylinder of a suspension bracket

1 – connection of a high pressure,

2 – a bolt of connection,

3 – a latch of an axis of the piston on the lever of a suspension bracket,

4 – a casing of the cylinder,

5, 6 – pipelines рециркуляции oils

Fixing elements of the cylinder of a suspension bracket

11 – a gearing spring on a cross-beam,

12 – fastening of springs,

13 – an element of fastening of the cylinder,

14 – connections of a casing,

15 – a basic element of the cylinder

PERFORMANCE ORDER
1. To establish the car on the stationary lift.
2. To remove the left facing of a luggage carrier.
3. To disconnect a socket (red) power supplies of the hydraulic pump (wire М326 and 326).
4. To connect free plugs of a socket near to the button of installation of a suspension bracket in the top position.
5. To reduce pressure so that suspension bracket cylinders it would be possible to move a hand.
6. To unscrew a nut of connection of the cylinder.
7. By means of a screw-driver to remove a latch.
8. To take an element of fastening of the cylinder.
9. To disconnect from the cylinder of a suspension bracket of the pipeline leakage liquids (the transparent pipeline) and air removals (to designate them concerning their rubber tips).
10. To remove a latch of connection of the cylinder of a suspension bracket with the lever (fig. Installation of the cylinder of a suspension bracket see).
11. To take the cylinder of a suspension bracket from under the car.
12. For installation of the cylinder of a suspension bracket it is necessary to execute actions in return sequence in relation to removal process. It is necessary to establish new consolidations, to remove air from a contour of a suspension bracket and to fill quantity of liquid LHM to necessary level.