1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
    11.1. A forward suspension bracket
    11.2. A back suspension bracket
      11.2.1. A technical characteristics
      11.2.2. Shock-absorber replacement
      11.2.3. Replacement torsionов
      11.2.4. The stabilizer
      11.2.5. The suspension bracket lever
      11.2.6. Removal and installation of a back suspension bracket
      11.2.7. Adjustment of height of a suspension bracket of a body
      11.2.8. Naves of back wheels
      11.2.9. Features of a back suspension bracket of cars 4 х 4
      11.2.10. Tank replacement
      11.2.11. Removal and installation of the lever of a suspension bracket
      11.2.12. Removal and installation of the cylinder of a suspension bracket
      11.2.13. Removal of air from a hydraulic contour
      11.2.14. Removal and pump installation
      11.2.15. Removal and nave installation
12. Brake system
13. A body
14. An electric equipment

11.2.10. Tank replacement
1. To establish the car on the stationary lift.
2. To remove the left facing of a luggage carrier.
3. To disconnect a socket (red) power supplies of the hydraulic pump (wire М326 and 326).
4. To connect free plugs of a socket near to the button of installation of a suspension bracket in the top position.
5. To reduce pressure so that suspension bracket cylinders it would be possible to move a hand.
6. To remove a heat-shielding casing.
7. A special key to unscrew a tank.
8. To clear a basic surface of the holder of a tank.
9. To establish on the holder of a tank the new sealant greased with liquid LHM.
10. To screw a tank, strongly tightening his hand.
11. To establish a heat-shielding casing.
12. To connect correctly sockets (as for normal work).
13. To remove air from a contour and to fill quantity of liquid LHM to necessary level.