Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
    4.1. Fuel system with the carburettor
    4.2. One-dot systems of injection of fuel
    4.3. Multidot systems of injection of fuel
      4.3.1. The air filter
      4.3.2. An accelerator cable
      4.3.3. Systems of injection of fuel
      4.3.4. Check and adjustment of systems of injection of fuel
      4.3.5. The case throttle заслонки
      4.3.6. Elements of system of injection Bosch L3. 1-Jetronic
      4.3.7. Elements of system of injection Bosch LU2-Jetronic
      4.3.8. Elements of system of injection Bosch Motronic
      4.3.9. Elements of system of injection Magnetti Marelli
      4.3.10. An inlet collector
      4.3.11. System of giving of air ACAV (models with 16 valves)
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





4.3.9. Elements of system of injection Magnetti Marelli MODELS 1,8 OF LITRES

Fuel atomizers

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. To remove the air filter.
3. To unscrew two bolts of fastening of wires to collector top.
4. To remove electric sockets from atomizers.
5. To unscrew bolts and to remove plates of fastening of atomizers. Atomizers 1 and 2 fasten one plate, and 3 and 4 – another.
6. To take atomizers and if necessary to replace sealing rings of round section.

Potentiometer of position throttle заслонки

The potentiometer of position throttle заслонки is established on the right side of the throttle case.

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. To remove an electric socket from a potentiometer.
3. To unscrew two screws and to remove a potentiometer.

The engine of a speed control of idling

Speed of idling copes the engine which is located in front on the case of throttles.

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. To remove an electric socket from the engine.
3. To unscrew two screws and to remove the engine from the case of throttles.

The gauge of temperature of arriving air

The gauge of temperature of arriving air is located in the case of throttles.

PERFORMANCE ORDER
1. To remove a potentiometer of position throttle заслонки.
2. To remove an electric socket from the gauge of temperature of air.
3. To unscrew the screw of fastening of the gauge and to remove it.

Element of heating of the case of throttles

The element of heating of the case of throttles is attached to top of the case of throttles.

PERFORMANCE ORDER
1. To remove an electric socket from a heating element.
2. To unscrew the screw of fastening of an element of heating and to remove it.

LITRE MODELS 2,0

Fuel highway and atomizers

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. To remove the air filter.
3. To remove pressure in fuel system.
4. To remove a vacuum tube of the gauge on a regulator of pressure and to unscrew a bolt of fastening of a regulator.
5. To release brackets and to remove various hoses from a highway.
6. To unscrew hoses of giving of fuel and returnable hoses.
7. To remove electric sockets from atomizers.
8. To unscrew three bolts of fastening of a fuel highway and, lifting it upwards, to remove a highway.
9. To remove brackets fastenings of atomizers to a highway and to take them.
10. To check up a condition of ring consolidations and if necessary to replace them.
11. To clear tips of atomizers, applying clearing liquid.

The gauge of temperature of arriving air

The gauge of temperature of arriving air is located in the case of throttles.

PERFORMANCE ORDER
1. To remove a potentiometer of position throttle заслонки.
2. To remove an electric socket from the gauge of temperature of air.
3. To unscrew the screw of fastening of the gauge and to remove it.

The gauge of speed of the car

The gauge of speed of the car – an integral part of a drive of a speedometer.

The detonation gauge

The detonation gauge is screwed up on a back part of the block of cylinders.