Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
4.1. Fuel system with the carburettor
4.2. One-dot systems of injection of fuel
4.3. Multidot systems of injection of fuel
4.3.1. The air filter
4.3.2. An accelerator cable
4.3.3. Systems of injection of fuel
4.3.4. Check and adjustment of systems of injection of fuel
4.3.5. The case throttle заслонки
4.3.6. Elements of system of injection Bosch L3. 1-Jetronic
4.3.7. Elements of system of injection Bosch LU2-Jetronic
4.3.8. Elements of system of injection Bosch Motronic
4.3.9. Elements of system of injection Magnetti Marelli
4.3.10. An inlet collector
4.3.11. System of giving of air ACAV (models with 16 valves)
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment
|
Elements of a control system of engine Bosch LU2-Jetronic are similar in operation on system Bosch L3. 1-Jetronic, described above, except position throttle заслонки and presence of the oxygen gauge.
Starting position throttle заслонки
The starting position throttle заслонки is established on manufacturer and does not demand adjustment.
THE OXYGEN GAUGE
The gauge is located in an exhaust pipe.
| PERFORMANCE ORDER |
| 1. To start and warm up the engine to working temperature, then to switch off the engine and to remove a wire of weight from the accumulator. |
| 2. To remove brackets and a socket from the gauge. |
| 3. To unscrew the gauge from an exhaust pipe. |
|
|
|