Peugeot405
1. The maintenance instruction
2. Maintenance service
   2.1. A technical characteristics
    2.2. Periodicity of service
    2.3. Each 7 500 km
    2.4. Each 10 000 km or 6 months
      2.4.1. Engine oil and filter replacement
      2.4.2. Level check трансмиссионного oils
      2.4.3. Check and tension adjustment клинового a belt
      2.4.4. Check auxiliary driving a belt
       2.4.5. Removal, installation and tension adjustment клинового driving a belt
         2.4.5.1. Early models
         2.4.5.2. Models with manual adjustment of a tension
         2.4.5.3. Models with automatic adjustment of a tension
      2.4.6. The pump of the amplifier of a steering (XU9J4 with 16 valves)
    2.5. Each 20 000 km or 12 months
    2.6. Each 30 000 km or 18 months
    2.7. Each 40 000 km or 2 years
    2.8. Each 60 000 km or 3 years
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


2.4.5. Removal, installation and tension adjustment клинового driving a belt

2.4.5.1. Early models

Removal

PERFORMANCE ORDER
1. To weaken bolts of an axis of turn of the generator of an alternating current and communication bolts, then to unscrew a bolt of a regulator of a tension for tension reduction driving a belt.
2. To remove driving a belt.

Installation and tension

PERFORMANCE ORDER
1. To establish driving a belt on pulleys.
2. The belt tension should be adjusted so that by moderate pressing of a thumb of a hand the middle of a long branch of a belt a deflection of a belt And made approximately 6,0 mm.
3. To regulate a tension of a belt a regulator bolt, then to tighten a point of turn of the generator and communication bolts (the arrow specifies a bolt of fastening of a suspension bracket of a pulley of adjustment of a tension).