Peugeot405
1. The maintenance instruction
2. Maintenance service
   2.1. A technical characteristics
    2.2. Periodicity of service
    2.3. Each 7 500 km
    2.4. Each 10 000 km or 6 months
      2.4.1. Engine oil and filter replacement
      2.4.2. Level check трансмиссионного oils
      2.4.3. Check and tension adjustment клинового a belt
      2.4.4. Check auxiliary driving a belt
       2.4.5. Removal, installation and tension adjustment клинового driving a belt
      2.4.6. The pump of the amplifier of a steering (XU9J4 with 16 valves)
    2.5. Each 20 000 km or 12 months
    2.6. Each 30 000 km or 18 months
    2.7. Each 40 000 km or 2 years
    2.8. Each 60 000 km or 3 years
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


2.4.3. Check and tension adjustment клинового a belt
THE GENERAL DATA
The prevention

On models since 1994 the specified interval for this procedure – 30 000 km.

Peugeot orders use of the special electronic tool for correct installation of a tension driving a belt. If this equipment is absent, approximate installation can be reached a method described in subsection 2.4.5.1, subsection 2.4.5.2, subsection 2.4.5.3.

All engines, except engine XU9J4 with 16 valves, are equipped приводным by a belt which is resulted from a pulley of a cranked shaft on the forward party of the engine.

On models without the conditioner the belt drive puts in action the generator of an alternating current and the pump of the amplifier of a steering. On models with an air conditioning the belt drive puts in action the alternating current generator, the pump of the amplifier of a steering and the air conditioning compressor. On models XU9J4 separate driving the belt puts in action the pump of the amplifier of a steering from a pulley on the camshaft end.