Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
    11.1. A forward suspension bracket
      11.1.1. A technical characteristics
      11.1.2. A rotary fist
      11.1.3. Replacement of the forward bearing of a nave
      11.1.4. A forward rack
      11.1.5. Repair of a forward rack
      11.1.6. The bottom lever of a forward suspension bracket
      11.1.7. The bottom spherical hinge of a forward suspension bracket
      11.1.8. The stabilizer of cross-section stability of a forward suspension bracket
      11.1.9. A connector of the stabilizer of cross-section stability of a forward suspension bracket
      11.1.10. The bottom frame of a forward suspension bracket
    11.2. A back suspension bracket
12. Brake system
13. A body
14. An electric equipment





11.1.9. A connector of the stabilizer of cross-section stability of a forward suspension bracket
THE GENERAL DATA

The prevention

At connector installation it is necessary to use new nuts of fastening.


Removal

PERFORMANCE ORDER
1. To lift a forward part of the car and to fix on supports. To remove forward wheels.
2. To unscrew nuts of fastening of connectors to the stabilizer and an arm of a forward suspension bracket. To take them from under the car.
3. To check up a condition of connectors on deterioration and damages.

Installation

PERFORMANCE ORDER
For stabilizer installation it is necessary to execute actions in return sequence in relation to removal, paying attention to correct installation of support and lateral basic elements. Connectors should be screwed up, when the car costs on the earth.