Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
    11.1. A forward suspension bracket
      11.1.1. A technical characteristics
      11.1.2. A rotary fist
      11.1.3. Replacement of the forward bearing of a nave
      11.1.4. A forward rack
      11.1.5. Repair of a forward rack
      11.1.6. The bottom lever of a forward suspension bracket
      11.1.7. The bottom spherical hinge of a forward suspension bracket
      11.1.8. The stabilizer of cross-section stability of a forward suspension bracket
      11.1.9. A connector of the stabilizer of cross-section stability of a forward suspension bracket
      11.1.10. The bottom frame of a forward suspension bracket
    11.2. A back suspension bracket
12. Brake system
13. A body
14. An electric equipment





11.1.8. The stabilizer of cross-section stability of a forward suspension bracket
THE GENERAL DATA

The prevention

For fastening of a connector of the stabilizer it is necessary to use new nuts.


Stabilizer fastening

1 – a connector,

2 – the lever,

3 – the stabilizer

Removal

PERFORMANCE ORDER
1. To lift a forward part of the car and to fix on supports. To remove forward wheels.
2. To unscrew bolts of fastening of connectors of the stabilizer to the bottom levers.
3. To unscrew nuts of fastening of connectors to the stabilizer of cross-section stability.
4. To put combination labels on the stabilizer and clips of fastening of the stabilizer to the bottom frame.
5. To unscrew tightening bolts () and to remove clips of fastening of the stabilizer to bottom frame, thus is not required to remove a metal clip ().
6. To take the stabilizer from under the car.

Installation

Installation is made in sequence of return to removal.