Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
4.1. Fuel system with the carburettor
4.2. One-dot systems of injection of fuel
4.2.1. Pressure removal in fuel system
4.2.2. Adjustment of a cable of an accelerator
4.2.3. The fuel pump
4.2.4. An injector
4.2.5. Check of system of injection of fuel
4.2.6. Elements of system of injection Fenix
4.2.7. Elements of system of injection Bosch Monopoint
4.2.8. Elements of system of injection Magneti Marelli
4.3. Multidot systems of injection of fuel
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment
|
Check
| PERFORMANCE ORDER |
| 1. To check up reliability of connection of wires and absence of corrosion. |
| 2. To check up a condition of the air filter and spark plugs. |
| 3. To check up pressure of a compression in engine cylinders. |
| 4. To check up installation of a corner of an advancing of ignition. |
|
Adjustment
On systems Fenix and Bosch, regulation is not provided. If speed of idling or mix structure do not correspond to norm, means, the management block is damaged.
On system Magneti Marelli, regulation of installation of a mix and a corner of an advancing of ignition is possible. However, regulation can be made only by reprogramming ECU, with use of the special diagnostic equipment. |
|