Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
    4.1. Fuel system with the carburettor
    4.2. One-dot systems of injection of fuel
      4.2.1. Pressure removal in fuel system
      4.2.2. Adjustment of a cable of an accelerator
      4.2.3. The fuel pump
      4.2.4. An injector
      4.2.5. Check of system of injection of fuel
      4.2.6. Elements of system of injection Fenix
      4.2.7. Elements of system of injection Bosch Monopoint
      4.2.8. Elements of system of injection Magneti Marelli
    4.3. Multidot systems of injection of fuel
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


4.2.4. An injector
THE GENERAL DATA

The air filter (system of injection of fuel Magneti Marelli)


Screws of fastening of an atomizer on system Monopoint Bosch

Screws of fastening of an atomizer are noted by arrows.

Removal

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator and the air filter.
2. To remove wires from a potentiometer of position throttle заслонки, an atomizer and the management engine приоткрыванием throttle заслонки.
3. To remove fuel and returnable hoses (are specified by arrows for half-its late model).
4. To remove an accelerator cable.
5. To unscrew screws of fastening of an injector to an inlet collector and to remove it together with a lining.

Installation

PERFORMANCE ORDER
Installation is into place made in sequence of return to removal, thus it is necessary to consider:
      – Surfaces прилегания should be dry and pure. It is obligatory to establish a new lining;
      – Correctly to connect all hoses and sockets.