Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
    4.1. Fuel system with the carburettor
    4.2. One-dot systems of injection of fuel
      4.2.1. Pressure removal in fuel system
      4.2.2. Adjustment of a cable of an accelerator
      4.2.3. The fuel pump
      4.2.4. An injector
      4.2.5. Check of system of injection of fuel
      4.2.6. Elements of system of injection Fenix
      4.2.7. Elements of system of injection Bosch Monopoint
      4.2.8. Elements of system of injection Magneti Marelli
    4.3. Multidot systems of injection of fuel
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


4.2.3. The fuel pump Removal

PERFORMANCE ORDER
Established outside
1. To lift a back part of the car.
2. To disconnect from the pump electric wires and fuel hoses.
3. To take the pump from belts of a rubber pillow (And – electric wires of the fuel pump, In – hoses of giving of fuel).
Established in a fuel tank
4. To remove back sitting.
5. To remove by means of the lever a plastic covering of a floor for access to the pump. The pump is located under the right covering.
6. To remove a socket of electroconducting from the fuel pump.
7. To note for identification hoses (are specified by arrows), then to weaken collars, to remove hoses and to muffle their stoppers.
8. To put labels on a fuel tank, a cover of the pump and a ring, then to unscrew a ring, rotating it counter-clockwise.
9. To lift a pump cover, then being careful to take the fuel pump (drawing at the left) and rubber ring consolidation (drawing on the right).

Installation

PERFORMANCE ORDER
1. Pump installation is made in sequence of return to removal.
2. At installation of the pump located in a fuel tank it is necessary to check up a condition of the filter and to establish a new rubber sealing ring.